AlphaWater Plumbing Portfolio | Real Projects Across Kuala Lumpur
Trusted by Homes & Businesses for Drain Unclogging & General Plumbing Since 2015
From high-rise condos in Mont Kiara to terrace homes in PJ and commercial kitchens in Shah Alam — AlphaWater Plumbing has successfully solved hundreds of plumbing and drainage issues across the Klang Valley.
💧 “There’s no drain we can’t handle.”
🛠️ Real tools. Real work. Real results.
What have we gone through
🏢 Featured Projects
- Kuala Lumpur, Malaysia
🔧 1. High-Pressure Water Jetting – Mont Kiara Landed (2024)
💬 Client Feedback:
“Called at night, plumber came tomorrow. No more backflow after jetting. Highly recommended!”
Location: Mont Kiara
Service: 1st floor bathroom unclogging & jetting service
Tools Used: Commercial Water Jet, CCTV Camera
✅ Issue:
Tenant reported a persistent 1st floor bathroom clog and slow water flow.
✅ Diagnosis:
Using CCTV inspection, we found heavy sewage and toilet papers blocking the pipe.
✅ Solution:
Performed high-pressure jetting to flush out the blockage and cleaned 10 meters of internal piping. Re-checked with CCTV to confirm full clearance.
✅ Result:
Water flow fully restored within 3 hours. Tenant happy and bathrooms usable immediately.
Full Water Pipe Repiping
Solving Rusty & Low Pressure Plumbing Issues in Damansara
📍 Location: Damansara Utama
🛠️ Service: New Exposed Inlet Pipes Repiping
🔧 Problem: Rusty Water, Pipe Leaks, and Low Pressure
❌ Problem Summary:
This home in Damansara Utama had 30-year-old galvanized pipes causing:
Rusty, brown water at the taps
Weak water pressure at the upper floors
Hidden leaks behind walls and underground
Rising water bills from undetected pipe loss
🔎 Site Findings:
All main supply lines were galvanized iron (GI)
Corrosion had reduced internal diameter by 80%+
Multiple weak joints, patch-repaired over the years
Outdated fittings and inconsistent pressure
✅ Our Solution: Full Repiping with Poly Hansen Poly Pipes
We replaced the entire cold water line system using Poly Hansen polyethylene (PE) pipes — a reliable, flexible, and long-lasting piping material ideal for both underground and wall installations.
💡 Why Poly Hansen Poly Pipes?
Rust-proof & corrosion-resistant
Smooth internal walls = improved pressure
More flexible than PVC (no cracking under soil movement)
Suitable for both exposed and concealed piping
Long service life (50+ years in typical residential use)
🔧 Work Process:
Shut off & isolate old GI supply
Installed new Poly Hansen Poly (HDPE) pipes with compression fittings
Added new main valve + isolation valves at kitchen and bathrooms
Pressure-tested the full system — no leaks, improved flow rate
Re-sealed external ground trenches neatly after repiping
🕒 Duration: 2 Days (Full System)
🧰 Materials Used:
Poly Hansen Poly Pipes (HDPE Grade)
Brass compression fittings
Isolation valves & stopcocks
Main gate valve (1”) and more…
💬 What the Client Said:
“After years of dealing with rusty water and patch jobs, I finally have clean pressure again. Thanks for recommending Poly pipes — smooth job, very tidy.”
Toilet Bowl Replacement
Replacing a 20-Year-Old Toilet Bowl – Leak, Odor & Loose Base Resolved
📍 Location: Petaling Jaya (Section 17)
🛠️ Service: Toilet Bowl Replacement & Proper Reinstallation
⚠️ Problem: Aging Toilet, Water Leak, Bad Odor, Wobbling Base
The client had been using the same toilet bowl for over 20 years.
Recently, they noticed it started leaking behind the bowl, and there was a strong sewer smell after each flush.
They tried to ignore it — mopping the floor after every use — but over time, the problem got worse:
The toilet was slightly loose and wobbly
Water started seeping through floor tiles
Bad odor lingered in the bathroom
A crack appeared at the ceramic base
🔎 What We Found:
Upon removal, we discovered:
The seal had completely worn out
The bottom of the bowl had minor cracks
- ✅ Our Professional Fix:
Removed the 20-year-old toilet and cleaned the base thoroughly
Checked for subfloor water damage (none luckily)
Installed a new modern toilet bowl with proper flange alignment
Fitted a new offset and tightened new anchor bolts
Sealed edges with industrial-grade sealant
Test flushed 5 times to ensure no leaks or odor
💬 Client Feedback:
“Very good workmanship! I should have called you sooner. The toilet is now stable, clean, no more smell or leak. Thank you for your fast response and neat work!”